Woodcrafts and Carbide Chisels Supplies
Home
New Page
Links to YouTube
Dispatch Time and over seas shipping
About My Chisels
Carbide Cutters
Replacement Carbide Cutters
Set of sanding arbours
14mm Square Carbide Chisels
12mm Round Carbide Chisels
Detail Carbide Chisels
15mm Square Chisel
15mm Round Chisel
Large Detail chisel
SCH Range of chisels
Spindle Turning Chisels
6mm AU and AU 8mm Hollower
10mm AU Hollower
12mm AU Hollower
Deep Hollower 12mm AU Cutter
Deep Hollower 10mm AU cutter
Deep Hollower 9mm round
GT no 1 Box Hollower 9mm Round
GT no 2 Box Hollower
12mm Round Chisel With 16mm Round Bar
15mm Round Chisel With 16mm Round Bar
15mm R2 Chisel
Detail 90
Contact me
FEEDBACK Page
Returns/Delivery Policy
My Privacy Policy

15mm Square Chisel

15mm Sq
        
                                              This is our 15mm Square Carbide Chisel
 
This chisel has a 14 inch handle and a 9 inch 12mm Square bar.
 
 
Our Square Carbide chisel, has been designed and made to do a variety of jobs. Most commonly called a Rougher, in the Woodturning world. This does not apply to our Square Carbide chisel. This tool has had the cutter fitted and the bar ground to allow the bevel of the cutter to be used.  Being able to use the bevel of the cutter, not only means this tool has the ability to mimic many traditional woodturning tools, it also makes it far safer in use. Maintaining bevel contact is what reduces the chances of catches. This is discussed and demonstrated in many of my YouTube videos, which I would advise you watching, to see how you can get the most out of this tool. Not only can this tool achieve the same results as a Skew chisel and Beading Parting Tool, it's fantastic for hollowing straight sided vessels. When used as described in my videos, with the tool rest set so the cutter is above centre, you start the cut and head down towards centre, which because of the angle and size of the bevel, the bevel comes into use during this cut, eliminating the grabbing and catching which is associated with using Scrapers when doing this type of hollowing. Again, this is far better to be seen in action on my videos, where I give full detailed instruction of how to do this.
 
When using this chisel for roughing down spindle work, again, this tool has been designed so the bevel of the cutter can be used to give a more controlled cut, reducing the chances of grabbing and catching, which is commonly experienced when using carbides as a Scraper. Again, I can not stress enough the importance of watching our YouTube videos where you will gain an understanding in the correct wat to use my tools. In no time you will be achieving professional finishes straight off the tool, reducing sanding.
 
Of course, if you want to use them as Scrapers, just making plunge cuts, then these are more than capable of doing that as well. 
 
£36.00 free uk postage. 
 
Sorry no shipping outside of the UK. Please do not purchase as your items will not be sent.

 

 
15mm Square chisel

 

 

 

 
Chisel Display

set chisels